|
PRODUCTS
|
Floor Scales, Balances, Price Computing Scales and Bench Scales
are available everyday
Henry Troemner Stainless Steel Slotted Calibration Test Weights
Stainless Steel
Slotted Weights are used in a variety of applications such as pressure,
torque, and tensile strength testing. Stainless Steel Slotted Weights
are typically used with a hanger that also has its weight calibrated
so the hanger can be used as part of the overall weight under test.
Several Stainless Steel Slotted Weights may be used together to
build up from a minimum weight to a maximum test load. The hanger
weight selected should be able to accommodate the total load needed.
Contact your Troemner sales representative for more information
on hangers.
Construction
and General Shape
Troemner's Stainless Steel Slotted Weights are manufactured from
Stainless Steel that meets ANSI/ASTM E617 hardness requirements.
Each weight has the nominal value stamped into the topside of the
weight. The interlocking design helps secure a stack of slotted
weights onto a hanger. Hangers are available in a variety of lengths
and weight capacities. Hooks on hangers have a 1/2 inch opening.
Need a certificate
with your Troemner weight? Please look over the following information
to determine what certificate you need.
|
Troemner
Certificate Matrix -- See which cert you need |
|
| NVLAP
Weight Calibration Certificate |
NVLAP
Weight Calibration Certificate is a detailed, multi-page weight
certificate designed to meet all of your ISO (including ISO/IEC
17025), FDA, GMP, GLP, DOD, ANSI/NCSL Z540-1, and nuclear requirements.
The NIST-administered National Voluntary Laboratory Accreditation
Program (NVLAP Lab Code 105013-0) approves all procedures for
this detailed weight certificate. The measurement process follows
the recommendations of NIST Handbook 145.
|
|
| Traceable
Weight Certificate |
Traceable
Weight Certificate - designed for those laboratories and companies
that require traceability, but do not need to meet any stringent
regulatory requirements. In contrast to NVLAP or UKAS calibration
procedures, the Traceable Weight Certificate measurement process
is based on a single standard and utilizes one series of comparisons.
|
|
| Statement
of Accuracy |
New
weights and weight sets supplied without weight certificates
come with Troemner's Statement of Accuracy which provides the
nominal value, type of weight, material / density and weight
class. Note: There is no NIST traceability supplied with
this statement. The Statement of Accuracy is not suitable for
quality or regulatory requirements. Troemner's Statement of
Accuracy is only available with the purchase of new weights.
Troemner's Brass Weights are not supplied with a Statement of
Accuracy.
|
|
Prices
& Specifications subject to change without notice
|
